View MC10EL57_104320.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
4:1 Differential Multiplexer
The MC10/100EL57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting between D0 and D1. The fully differential architecture of the EL57 makes it ideal for use in low skew applications such as clock distribution. The SEL1 is the most significant select line. The binary number applied to the select inputs will select the same numbered data input (i.e., 00 selects D0). Multiple VBB outputs are provided for single-ended or AC coupled interfaces. In these scenarios, the VBB output should be connected to the data bar inputs and bypassed via a 0.01F capacitor to ground. Note that the VBB output can source/sink up to 0.5mA of current without upsetting the voltage level.
MC10EL57 MC100EL57
16 1
D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05
* * * *
Useful as Either 4:1 or 2:1 Multiplexer VBB Output for Single-Ended Operation 75k Internal Input Pulldown Resistors >1000V ESD Protection
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
VCC SEL0 SEL1 16 15 14 Q 13 Q 12 VBB1 VBB2 VEE 11 10 9
PIN DESCRIPTION PIN D0-3 SEL0,1 VBB Q0 FUNCTION Diff Data Inputs Mux Select Inputs Reference Output Data Outputs
4:1
FUNCTION TABLE SEL1
1 D0 2 D0 3 D1 4 D1 5 D2 6 D2 7 D3 8 D3
SEL0 L H L H
DATA OUT D0 D1 D2 D3
L L H H
ABSOLUTE MAXIMUM RATINGS1
Symbol VEE VI Iout TA VEE Power Supply (VCC = 0V) Input Voltage (VCC = 0V) Output Current Continuous Surge Characteristic Rating -8.0 to 0 0 to -6.0 50 100 -40 to +85 -5.7 to -4.2 Unit VDC VDC mA C V
Operating Temperature Range Operating Range1,2
1. Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 2. Parametric values specified at: 10EL Series: -4.94V to -5.50V 100EL Series: -4.20V to -5.50V
1/95
(c) Motorola, Inc. 1996
3-1
REV 1
MC10EL57 MC100EL57
10EL SERIES DC CHARACTERISTICS (VEE = VEE(min) - VEE(max); VCC = GND1)
-40C Symbol VOH VOL VIH VIL Characteristic Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltge Min -1080 -1950 -1230 -1950 Max -890 -1650 -890 -1500 Min -1020 -1950 -1170 -1950 0C Max -840 -1630 -840 -1480 Min -980 -1950 -1130 -1950 25C Max -810 -1630 -810 -1480 Min -910 -1950 -1060 -1950 85C Max -720 -1595 -720 -1445 Unit mV mV mV mV
IIL Input LOW Current 0.5 -- 0.5 -- 0.5 -- 0.3 -- A 1. 10EL circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Outputs are terminated through a 50 resistor to -2.0V except where otherwise specified on the individual data sheets.
100EL SERIES DC CHARACTERISTICS (VEE = VEE(min) - VEE(max); VCC = GND1)
-40C Symbol VOH VOL VOHA VOLA VIH VIL Characteristic Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltge Min -1085 -1830 -1095 -- -1165 -1810 Typ -1005 -1695 -- -- -- -- Max -880 -1555 -- -1555 -880 -1475 Min -1025 -1810 -1035 -- -1165 -1810 0C to 85C Typ -955 -1705 -- -- -- -- Max -880 -1620 -- -1610 -880 -1475 Unit mV mV mV mV mV mV Condition VIN = VIH(max) or VIL(min) VIN = VIH(max) or VIL(min)
IIL Input LOW Current 0.5 -- -- 0.5 -- -- A VIN = VIL(max) 1. This table replaces the three tables traditionally seen in ECL 100K data books. The same DC parameter values at VEE = -4.5V now apply across the full VEE range of -4.2V to -5.5V. Outputs are terminated through a 50 resistor to -2.0V except where otherwise specified on the individual data sheets.
AC/DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
-40C Symbol IEE VBB IIH tPLH tPHL tSKEW VPP VCMR tr tf Characteristic Power Supply Current 10EL 100EL -1.43 -1.38 Min Typ Max 24 24 -1.30 -1.26 150 350 440 550 690 100 250 -2.0 125 -0.4 375 250 -2.0 125 -0.4 375 350 440 -1.38 -1.38 Min 0C Typ Max 24 24 -1.27 -1.26 150 550 690 100 250 -2.0 125 -0.4 375 360 440 -1.35 -1.38 Min 25C Typ Max 24 24 -1.25 -1.31 -1.26 -1.38 150 560 690 100 250 V -2.0 125 -0.4 375 ps 380 460 Min 85C Typ Max 24 27 -1.19 -1.26 150 580 710 100 Unit mA V ps ps mV
Output Reference 10EL Voltage 100EL Input High Current Propagation DATAQ/Q Delay SELQ/Q Input Skew Dn, Dm to Q Minimum Input Swing CLK Common Mode Range CLK Output Rise/Fall Times Q (20% - 80%)
MOTOROLA
3-2
ECLinPS and ECLinPS Lite DL140 -- Rev 3
MC10EL57 MC100EL57
OUTLINE DIMENSIONS
D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J
-A-
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019
16
9
-B-
1 8
P
8 PL
0.25 (0.010)
M
B
S
G F
K C -T-
SEATING PLANE
R
X 45 _
M D
16 PL M
J
0.25 (0.010)
TB
S
A
S
DIM A B C D F G J K M P R
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
ECLinPS and ECLinPS Lite DL140 -- Rev 3 3-3
*MC10EL57/D*
MC10EL57/D MOTOROLA

▲Up To Search▲

Price & Availability of MC10EL57

	To Download MC10EL57 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .